A small amount of gel inside the cap can occur if excess gel is dispensed or if the cap is replaced without removing any excess product from the tip of the pump. Try the following solutions in order: 

• Solution 1: Wipe away excess gel
  • Use a clean tissue to gently remove any gel from the tip of the dispenser and inside the cap before replacing it. 
     
• Solution 2: Dispense the only amount needed
  • Only pump until a small amount of gel appears on the dispenser  tip. Dispensing more than necessary may cause excess gel to collect inside the cap.
     
• Solution 3: Store the bottle upright and the cap is fully secured
  • When possible, store the whitening booster upright with the cap securely attached to help keep the gel contained. 
     
• Solution 4: Contact Auraglow Support
  • If the booster bottle continues to leak excessively or appears damaged, please contact Auraglow Support by clicking here.