Before You Begin

1. Fully charge the LED whitening light using the included USB charging cable. Once the light is fully charged, the button will change from a slow flashing white to a solid green.
2. Wash your hands.
3. Floss and brush your teeth to remove plaque and food particles.
4. Dry the front surfaces of your teeth with a clean tissue or towel. This helps the whitening gel stay in place.
    

Step 1: Apply the Whitening Gel

1. Remove the cap from the whitening gel syringe.
2. Apply a thin line of gel along the inside front of both the upper and lower sections of the LED mouth tray. Each total application should be only the gel between two of the lines on the syringe - each of these gel portions represents one application.
    

Step 2: Insert the Mouth Tray

1. Place the LED mouth tray comfortably over your teeth.
2. Gently bite down to hold the tray in place.
    

Step 3: Turn On the LED Light

1. Press the Auraglow logo on the front of the LED light to turn it on.
2. The light will remain on for a 30-minute whitening session before automatically shutting off.
    

Step 4: Relax During Treatment

1. Wear the tray for the full 30 minutes.
2. Avoid eating, drinking, or talking excessively during the treatment.
3. If you feel the need to spit/release excessive saliva during the application, carefully do so - this will not lessen the potency of the gel in any way.
    

Step 5: Finish the Session

1. Remove and rinse the tray after the light turns off.
2. Rinse your mouth thoroughly with water.
3. Store the LED light and accessories in the storage case.
    

Step 6: Repeat Daily

• Use the kit once per day for 30 minutes.
• Continue daily treatments for 14 consecutive days, or until you've reached your desired shade.
• Wait at least 1 hour after each whitening treatment before eating or drinking, especially coffee, tea, wine, soda, or other staining beverages.